For sale New PRUFTECHNIK VIBXPERT 3 Balancer Data Collector And Vibration Analyzer with affordable price USD $9950.00. Please contact us for ordering information. All prices are subject to change without notice, except that prices for an order that have been accepted.


The VIBXPERT 3 Balancer is a vibration analyzer and balancing tool offered by FLUKE Reliability. This device is designed to analyze and balance rotating machinery, helping to detect and correct imbalance issues to improve equipment performance and longevity. The page highlights key features such as its intuitive interface, advanced measurement capabilities, and compatibility with various industrial applications. Additionally, it emphasizes the tool’s portability, ruggedness, and versatility for use in diverse operating environments.

Fast, accurate, advanced balancing device! The mobile solution for machinery health monitoring. The VibXpert 3 Balancer is an advanced smart condition monitoring field balancing tool that enables users to quickly and effectively correct unbalanced faults.

- Best practice and customizable machine templates
- Modern data processing: 6 synchronous analog channels
- Enhanced balancing reports
- Simplified data management and analysis
- Captures balancing data, overall vibration values, and spectral data
- Large, user-friendly touchscreen
- Dual-redundant button configuration
- IP-65 rated, shockproof, scratch-resistant and drop-proof


Specifications:

Measure channels

Number : 6 synchronous analog channels
               2 trigger points
Channel : 1 to 6 : (0 ... 50 kHz)
               -20 .. +20 V, input impedance: 78 kOhm IEPE
               Linedrive
Connector : 1 and 4: Triaxial sensor, single Axial sensor and Vibcode
                  2,3,5,6: Single Axial sensor
Dynamic range : 108 dB (total)
Sampling rate : up to 131 kHz per channel (Trigger 1048 kHz)
Signal processing : 6 x 24 bit ADCs (Trigger 2 x 14bit)
Measure range/accuracy : Vibration acceleration: dependent on used sensor
                                      Shock pulse: -10 dBsv to 80 dBsv +/- 2 dBsv
RPM : 10 ... 120 000 1/min / ±.010/00 or ± 1 1/min (the lower accuracy is applicable)
Certified standard : DIN ISO 2954:2012 (2-1 kHz, 10 Hz -1 kHz, 10-10 KHz)


Display

Type : Capacitive touchscreen
          Optically bonded for high contrast and increased shock resistance
Active area : (220 x 137) mm (7 7/8” x 5 25/64”) (1280 x 800 pixels)
Size : 256 mm (10 5/64’’)
Color depth : 16.7 million colors
Viewing angle : < 150°
Operation : Multi-touch — gesture control
                 Glove-compatible
Illumination : Backlit, adjustable
Amber light sensor : Yes


Power supply

Battery type : Lithium-Ion rechargeable battery
Nominal voltage : 7.2 V
Energy density 72 Wh : 72 Wh
Charge time (typical) : 6.5 hrs (0 to 100% @ 25 °C / 77 °F)
                                  3.5 hrs (0 to 80% @ 25 °C / 77 °F)
Charge temperature : 10 °C to 40 °C (50 °F to 104 °F)
Operation time (typical) : 8 hours (brightness 50%, Sensor measuring in preview mode)
Charger : 100-240 V~, 50-60 Hz (input)
              12 V 3 A (output)
Energy saving mode : Yes


Computer

Processor : ARM 4 x Cortex-A53 1.6 GHz
Operating elements : Multi- touchscreen, ON/OFF button, 2 ENTER buttons
Memory : microSD card, 256 GB for measured data, permanently installed 4 GB
USB : 1 x USB 2.0, device interface
RFID : RFID reader module for PRÜFTECHNIK transponder ALI 50.628-25 Complies with ISO 14443a and ISO 15693
       Read distance: 2 – 3 cm / 25/32” – 1 3/16”
WiFi : IEEE 802.11a/b/g/n/ac Throughput: < 200 Mbps
          Security: WPA2
RF Frequency Range : 2.400 – 2.4835 GHz
                                5.180 – 5.210 GHz
                                5.785 – 5.815 GHz
Maximum transmit power : 802.11b: 18 dBm + 1.5 dB
                                        802.11a/g/n/ac: 16 dBm + 1.5 dB
Transmit power classic Bluetooth : Class 2, Class 1, BR: 10 dBm +2 dB,
                                                  EDR: 8 dBm + 2 dB
Transmit power BLE : EMMY-W161: 7.8 dBm + 2 dB
Stroboscope : Frequency range: 0.1 – 1000 Hz
                     Resolution: 0.06 1/min.
                     LEDs: Risk group 1 per IEC 62471
LED : 1x RGB LED (display for battery and charge statuses)


Environment / General

Connections : Charge socket for charger
                     USB type C port for data cable
                     2 x plug-in connector (8-pole) for signal cable
                     4 x plug-in connector (3-pole) for signal cable
                     2 x plug-in connector (4-pole) for trigger
Housing : 2-component housing: Premold: PC (LEXAN), black ; Overmold: TPE (Thermolast), black
Dimensions : 326 x 210 x 56mm (LxWxH) [12.83 x8.27 x 2.2”]
Weight : 2,2kg [77.6 oz]
IP Rating : IP65, dust-proof and spray water-protected
Temperature range : Operation: -10 °C to +50 °C (14 °F to 122 °F)
                              Storage: -20 °C to +60 °C (-4 °F to +140 °F)
Humidity : 0 ... 90 %, non-condensing
Certification : CE, RoHS, FCC, FCC/IC , UK CA
Camera : 13 MP Camera with autofocus